|
|
|
|
Puri Small & Medium Laser Tube: 150W-180W
|
The Shanghai Puri 150W-180W small&medium power CO2 laser tube mainly used for laser engraving and cutting, applies to the vast majority of domestic the laser machinery manufacturing. Puri laser tube with middle & small is excellent in good laser spot mode, enough power, long life, etc..。
Working Principle: high-pressure discharge stimulate high concentration CO2 to generate laser.
Laser Wave Length: 10.6um。
Laser Mode:low order mode.
Water-Cooling：purified water, appropriate temperature 10-35℃.
Working Environment:temperature 5-35℃, humidity 10-60%, clean environment, no serious pollution.
Working Current:25~30mA is appropriate (excessive current will affect laser power and laser tube lifetime.
Safety Demand:CO2 laser tube outputs invisible light, positive with high pressure, if necessary, eyewear is essential.
Laser State: Laser power will be attenuated when the laser tube is used at a certain time; If the laser is pink, it is in normal condition; if the laser is white, it means the laser power is attenuate. ( Laser tube is consumable, please change a new one when it can’t meet demand due to attenuation. )
Laser State:
1、 There are two points to support the laser tube at two sides, when you install the laser tube, the two points should be in 1/4 of the laser tube;
2、On the basis of cooling water above-in and below-out, if you rotate the laser tube slightly, it will affect laser spot and laser power.
Puri CO2 Laser Tube Parameter: (Testing & Waiting): |
Model/Length
(mm) |
Outer Diameter
(mm) |
Output Power
(W) |
Rated Power
(W) |
Ignition Voltage
(KV) |
Ignition Current
(MA) |
Working Voltage
(KV) |
Working Current
(MA) |
| pu2000 |
80 |
150-165 |
150 |
23-26 |
8-10 |
16-17 |
24-29 |
| pu2000 |
80 |
175-185 |
180 |
23-26 |
8-10 |
16-17 |
25-30 |
|
| |
|
| |
| |
|
|
|
|
|
|
|
|
